eISSN 2288-5218 pISSN 1229-3954
Download
Archives
-
Original Article
293
171
Original Article 2020-09-30
Comparative analysis of strain according to the deposition of a constant temperature water bath of a denture-base artificial tooth produced using three-dimensional printing ultraviolet-curing resin
Dong-Yeon Kim
Journal of Technologic Dentistry 2020; 42(3): 202-207 https://doi.org/10.14347/jtd.2020.42.3.202
, Gwang-Young Lee , Jae-Hong Kim , Cheon-Seung Yang 
-
Original Article 506
168
Original Article 2021-06-30
Analysis of deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a DLP printer
Dong-Yeon Kim
Journal of Technologic Dentistry 2021; 43(2): 48-55 https://doi.org/10.14347/jtd.2021.43.2.48, Gwang-Young Lee 
-
Original Article 393
147
Original Article 2021-09-30
Color evaluation by thickness of interim restorative resin produced by digital light processing 3D printer
Wol Kang
Journal of Technologic Dentistry 2021; 43(3): 77-83 https://doi.org/10.14347/jtd.2021.43.3.77, Won-Gi Kim 
-
Original Article 359
105
Original Article 2021-09-30
Evaluation of dimension stability according to UV-C ultrasonic cleaning of full arch artificial teeth made with DLP printer for photopolymerization
Dong-Yeon Kim
Journal of Technologic Dentistry 2021; 43(3): 84-92 https://doi.org/10.14347/jtd.2021.43.3.84, Gwang-Young Lee 
-
Case Report 330
114
Case Report 2021-12-31
Implant-assisted full denture using digital guide: a case report
Wook Tae Kim
Journal of Technologic Dentistry 2021; 43(4): 202-209 https://doi.org/10.14347/jtd.2021.43.4.202
-
Original Article 436
198
Original Article 2022-09-30
Comparison of polymerization by time of light curing for dental 3D printing
Dong-Yeon Kim
Journal of Technologic Dentistry 2022; 44(3): 76-80 https://doi.org/10.14347/jtd.2022.44.3.76, Gwang-Young Lee 
-
Original Article 275
107
Original Article 2022-12-30
An evaluation of marginal fit of resin single crown manufactured using a dental 3D printer
Ki-Baek Kim
Journal of Technologic Dentistry 2022; 44(4): 126-131 https://doi.org/10.14347/jtd.2022.44.4.126
-
Original Article 196
37
Original Article 2024-06-30
Evaluation of trueness of maxillary and mandibular denture bases produced with a DLP printer by immersion in a constant temperature water bath
Dong-Yeon Kim
Journal of Technologic Dentistry 2024; 46(2): 28-35 https://doi.org/10.14347/jtd.2024.46.2.28, Gwang-Young Lee 
Full Text
PDF
Cite
Vol.46 No.3
September 30, 2024
September 30, 2024
Most KeyWord
?
What is Most Keyword?
- It is most registrated keyword in articles at this journal during for 2 years.
Most Read
-
Effect of cement space on marginal and internal fit of a zirconia core fabricated using by additive manufacturing
Ji-Won Min, Se-Yeon Kim, Jae-Hong Kim
Journal of Technologic Dentistry 2024;46: 1-7 https://doi.org/10.14347/jtd.2024.46.1.1 -
Prosthetic restorations with cementless screw-retained implant systems: a case report
Young-hae Jung, Im-Sun Kim
Journal of Technologic Dentistry 2023;45: 124-130 https://doi.org/10.14347/jtd.2023.45.4.124
Most Downloaded
-
Effect of cement space on marginal and internal fit of a zirconia core fabricated using by additive manufacturing
Ji-Won Min, Se-Yeon Kim, Jae-Hong Kim
Journal of Technologic Dentistry 2024;46: 1-7 https://doi.org/10.14347/jtd.2024.46.1.1 -
Prosthetic restorations with cementless screw-retained implant systems: a case report
Young-hae Jung, Im-Sun Kim
Journal of Technologic Dentistry 2023;45: 124-130 https://doi.org/10.14347/jtd.2023.45.4.124
