eISSN 2288-5218 pISSN 1229-3954
Download
Archives
-
99
128
2018-12-30
Evaluation of fitness according to application of glass fiber reinforcement for lower jaw complete denture
Kim, Dong-Yeon;Park, Jin-Young;Bae, So-Yeon;Kang, Hoo-Won;Kim, Ji-hwan;Kim, Woong-Chul;
Journal of Technologic Dentistry 2018; 40(4): 201-207 https://doi.org/10.14347/kadt.2018.40.4.201
-
289
142
2020-03-30
Precision evaluation of impression surface of lower complete dentures reinforced with glass fiber
Kim, Dong-Yeon;Yang, Cheon-Seung;Lee, Gwang-Young;Kim, Ji-Hwan;
Journal of Technologic Dentistry 2020; 42(1): 27-33 https://doi.org/10.14347/kadt.2020.42.1.27
-
Original Article 451
159
Original Article 2020-12-30
Comparison of three-dimensional adaptation as per the rinsing time of temporary crown manufactured using a digital light processing printer
Beom-Il Lee
Journal of Technologic Dentistry 2020; 42(4): 334-340 https://doi.org/10.14347/jtd.2020.42.4.334
, Seung-Gyu You , Seung-Min You , Ji-Hwan Kim 
-
Original Article 616
190
Original Article 2021-06-30
Analysis of deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a DLP printer
Dong-Yeon Kim
Journal of Technologic Dentistry 2021; 43(2): 48-55 https://doi.org/10.14347/jtd.2021.43.2.48, Gwang-Young Lee 
-
Original Article 314
196
Original Article 2021-09-30
Observation of thermal properties of dental 3D printer materials
Joon-Boo Song
Journal of Technologic Dentistry 2021; 43(3): 71-76 https://doi.org/10.14347/jtd.2021.43.3.71, Yu-Jin Park , Sung-Min Choi 
-
Original Article 437
138
Original Article 2021-09-30
Evaluation of dimension stability according to UV-C ultrasonic cleaning of full arch artificial teeth made with DLP printer for photopolymerization
Dong-Yeon Kim
Journal of Technologic Dentistry 2021; 43(3): 84-92 https://doi.org/10.14347/jtd.2021.43.3.84, Gwang-Young Lee 
-
Original Article 813
263
Original Article 2022-06-30
Evaluation of marginal and internal accuracy of provisional crowns manufactured using digital light processing three-dimensional printer
Mi-Jun Noh
Journal of Technologic Dentistry 2022; 44(2): 31-37 https://doi.org/10.14347/jtd.2022.44.2.31, Ha-Bin Lee , Ji-Hwan Kim 
-
Case Report 411
137
Case Report 2024-03-30
Fabrication of a custom polyetherketoneketone post-and-core with digital technology
Ju-Hyoung Lee
Journal of Technologic Dentistry 2024; 46(1): 15-19 https://doi.org/10.14347/jtd.2024.46.1.15, Gyu-Heon Lee 
-
Original Article 372
91
Original Article 2024-06-30
Evaluation of trueness of maxillary and mandibular denture bases produced with a DLP printer by immersion in a constant temperature water bath
Dong-Yeon Kim
Journal of Technologic Dentistry 2024; 46(2): 28-35 https://doi.org/10.14347/jtd.2024.46.2.28, Gwang-Young Lee 
Full Text
PDF
Cite
Vol.46 No.4
December 30, 2024
December 30, 2024
Most KeyWord
?
What is Most Keyword?
- It is most registrated keyword in articles at this journal during for 2 years.
Most Read
-
Effect of cement space on marginal and internal fit of a zirconia core fabricated using by additive manufacturing
Ji-Won Min, Se-Yeon Kim, Jae-Hong Kim
Journal of Technologic Dentistry 2024;46: 1-7 https://doi.org/10.14347/jtd.2024.46.1.1 -
Linear measurement evaluation according to UV-type ultrasonic cleaning of artificial teeth for temporary dentures manufactured using a light-curing type printer produced by a DLP printer
Dong-Yeon Kim, Gwang-Young Lee
Journal of Technologic Dentistry 2024;46: 8-14 https://doi.org/10.14347/jtd.2024.46.1.8
Most Downloaded
-
Effect of cement space on marginal and internal fit of a zirconia core fabricated using by additive manufacturing
Ji-Won Min, Se-Yeon Kim, Jae-Hong Kim
Journal of Technologic Dentistry 2024;46: 1-7 https://doi.org/10.14347/jtd.2024.46.1.1 -
Linear measurement evaluation according to UV-type ultrasonic cleaning of artificial teeth for temporary dentures manufactured using a light-curing type printer produced by a DLP printer
Dong-Yeon Kim, Gwang-Young Lee
Journal of Technologic Dentistry 2024;46: 8-14 https://doi.org/10.14347/jtd.2024.46.1.8
